DIY Studded Cutoff Jean Shorts

I can never ever find shorts that fit me new from the store. I don't know what it is: some shorts are made for girls without butts, some fit perfectly in the butt but squeeze my legs like there's no tomorrow, and some I can't even get past my thighs until I go up a few sizes, and then they're way too big on my waist. Either way, for the past few years I've started just making old jeans into shorts. I decided a few weeks ago that I was getting tired of my old shorts and needed a new pair, so I made these!

First I went to Goodwill to find an old worn-in pair of jeans specifically for this purpose. I wasn't about to buy a $40 pair of jeans just to cut 50% of them off, and I didn't have any jeans I was willing to cut up at the time either. So I found this pair for $4.50 or so (I believe they're all around the same price), and thought they'd be perfect!

The first thing I do to make shorts out of jeans is take another pair of shorts that I like the length of, and trace the legs of the shorts on the jeans with the crotches matched up. I just used an old pair of Soffee shorts (love those!) and traced a line across the edge with a bit of chalk (so it'll wash off easily). If you want the shorts to be the same length as your other ones in the front and back, make sure you fit the example shorts accordingly--so when you're drawing a line for the front of your denim, trace the front of the shorts, and when you're tracing on the back, use the back of the shorts. Trust me, they are probably different (longer in the back, usually).

Cut a few inches below the chalk line. This will make it so you can try on your shorts and decide if the line is good, or if it needs to be raised/lowered. You can also see if you'd like to hem the shorts, or keep a rough edge so they fray. I chose to let mine fray.

Sew with matching (or close) thread along the final chalk line. This will make it so your shorts can still fray, but they won't keep fraying and getting shorter with every single wash. So wherever you put the stitches is where your shorts will stop fraying.

Cut off the excess fabric, leaving a little space below the thread. I left about a centimeter, because I wasn't sure how much they'd fray on the first wash.

Throw the shorts in the washer (especially if you get them from Goodwill or a thrift store like I did), and if you're not worried about shrinkage, you can put them in the dryer, too. I personally don't ever put my denim in the dryer, unless I'm really in a rush, so I let these air dry.

Your shorts will fray more with a few washes, so don't be discouraged if they don't look exactly how you want after the first wash.

I also wanted to add a little more flair to these since I have 3 or 4 similar pairs, so I added some small studs that I had left over from my studded shoes tutorial that I didn't know what to do with. I've worn my shorts a few times already and I love them! Hope this was helpful, and if you have any questions, don't hesitate to ask!

Shoesday Tuesday! Stud 'em up.

I've had this desire for a while to create my own studded shoes. The initial inspiration came from Honestly WTF's tutorial. While the pictures shown in that tutorial were of light blue and pink Vans with gold studs, I opted for a much cheaper choice, since this was my first time trying it and frankly I just like cheap stuff! :)

• First you'll need to get yourself a pair of sneakers, unless you have an old pair laying around that you want to use. I got my navy blue tennis shoes at Target for $12.99 (!). They also come in white, so if I decide I want another pair of these, I might end up going back and getting the white pair and just dyeing them! I wasn't up for paying 40 or 50 or 60 dollars for Vans, so these were the perfect replacement :)
• Secondly, you'll need some studs. The studs I got were super cheap. On almost all of the tutorials I found, they gave links to online stores that sold studs. Most of these places that I checked out per the advice of these tutorials sold the studs for like $30 for 100 studs! So glad I decided to check eBay; I got 200 of them for $2.45 with free shipping! You can check those out here if you'd like. They come in all different shapes and sizes; I chose the 7mm pyramid style. The only thing about these studs is that they do have prongs that push through the fabric. If you don't want to pierce holes in your shoes, you may opt for flat-back studs, as the tutorial above did, and glue them to the shoes.
• Tweezers are also a good thing to have, I found, to set the studs exactly where you want them. Maybe it's just me, but I was fumbling with them a bit and couldn't get them where I wanted them. So tweezers came in handy. They also helped in pushing down the little prongs of the studs on the insides of the shoes.

I took the laces out of my shoes, as you can see, to give myself easier access to the inside of them. Not a bad idea.

Start by lining your studs up along the bottom edge of the shoe (to give you a straight guideline all the way up), and determine how many you can fit. Do this BEFORE you start poking any through the canvas. You can see a little bit on the right side above that I misjudged my spacing, and the right side ended up being more spread out than the left side, where I tried to cram them all in.

Once you've figured out how you're going to arrange your studs, start poking them through the canvas one by one, and push the prongs inward to secure the studs, and so you won't feel them when you wear your shoes.

Continue building upwards and fit the studs on however you like. I'm not sure exactly how I did it, but somewhere along the way I miscounted, and ended up with a different design on the right shoe than on the left. I think they still look good, but it would've been better if they matched exactly haha! Hopefully no one will notice...

Continue on with the second shoe, and you've got yourself a brand-spankin' new pair of shoes for less than $15, when you could've spent nearly $200 from Vans or Converse! Congratulations, and wear 'em well :)

If you guys have any questions, I'd be happy to answer. And if you decide to make yourself a pair, I'd love to see how they turn out! :)

Happy studding!